HP-UX: Difference between revisions

From Smithnet Wiki
Jump to navigation Jump to search
 
(29 intermediate revisions by the same user not shown)
Line 1: Line 1:
== Hardware ==
== Hardware ==


* Vizualize C3000 (9000/785/C3000)
* Vizualize [https://www.openpa.net/systems/hp-visualize_b1000_c3000_c3600.html C3000] (9000/785/C3000)
* 400 MHz PA-RISC
* 400 MHz PA-RISC PA-8500
* 512 MB (4 of 8 slots, max 8 GB)
* 512 MB (4 of 8 slots, max 8 GB)
* fx6 4554B Graphics Card ([https://en.wikipedia.org/wiki/VESA_Plug_and_Display EVC] Output)
* fx6 4554B Graphics Card ([https://en.wikipedia.org/wiki/VESA_Enhanced_Video_Connector EVC] aka P&D-A Output)
** Initially driving: 1280x1024@75Hz, compatible with 1600x1200 @75 Hz
* Firmware 5.0, ISL A.00.43
* Firmware 5.0, ISL A.00.43
* Liteon CDROM LTN485S -> Samsung CDRW/DVD SM-352B
* Space for 2 SCSI-3 (Ultra 160) Disks
* Disk:
** Original: Seagate ST3920LC (9.1 GB, 10 k RPM, U160) / Fujitsu MAN3184MC (18 GB, 10 k RPM, U160)
** Upgraded: Fujitsu MAW3300NC (300 GB, 10 k RPM, U320)
* Supports HP-UX 11.11 (11i v1)
* Supports HP-UX 11.11 (11i v1)


Line 17: Line 23:
* [https://archive.org/details/hp-ux-11i-version-1-mission-critical-operating-environment-sept-2005 Misson Critical Environment (Sept 2005)]
* [https://archive.org/details/hp-ux-11i-version-1-mission-critical-operating-environment-sept-2005 Misson Critical Environment (Sept 2005)]
* [https://archive.org/details/hp-ux-11i-version-1-application-software-june-2006 Application Software (June 2006)]
* [https://archive.org/details/hp-ux-11i-version-1-application-software-june-2006 Application Software (June 2006)]
* [https://archive.org/details/hpux-11i-v2 HP-UX 11iv2]
* [https://archive.org/details/ftp-hpux-connect-org-uk HP Connect]
* [https://archive.org/details/ftp-hpux-connect-org-uk HP Connect]
== Boot ==
=== Processor Dependent Code ===
Interrupt PDC boot process by keyboard in 10s, to enter boot menu:
To show current options and help, and get to main menu:
display
help
main
Show boot path:
path
Boot from primary or alternative paths:
boot PRI
boot ALT
Search for boot devices:
search
Search for IPL devices:
search ipl
Boot from one of the paths above with Path Number:
boot P1
Set primary boot path to SCSI ID 6:
path pri P2
Enter configuration menu:
configuration
Show/change monitor configuration:
monitor list
Show/change time configuration:
time
Enter information menu:
information
Enter service menu:
service
=== Initial System Loader ===
Once a boot command is sucessful, the ISL is read from disk, and can be interacted with if chosen. Run Offline Diagnostics Environment (ODE):
ode
Or the HP-UX Secondary System Loader which starts the HP-UX kernel (vmunix):
hpux
possibly with flags  for single user, maintenance, or a custom kernel:
hpux –is
hpux –lm
hpux (;0)/stand/vmunix.prev
When booting off CD-ROM to install:
hpux (;0):INSTALL
See help for more.
== Installation ==
* HP-UX 11i Operating Environment March 2003 (2 CDs)
== Support Plus ==
mkdir /cdrom
ioscan -fnC disk
mount -F cdfs -o ro -r /dev/dsk/c1t2d0 /cdrom
See documents:
* /cdrom/USRGUIDE.PDF
* /cdrom/TEXT_FILES
== Administration ==
See also: [https://www.justsomestuff.co.uk/wiki/doku.php/hpux here]
=== Desktop ===
Enable/disable auto-start:
/usr/dt/bin/dtconfig -e
/usr/dt/bin/dtconfig -d
Control which X servers to start:
/etc/dt/config/Xservers
Errors:
/var/dt/Xerrors
=== Networking ===
Show network interfaces:
lanscan -i
ifconfig lan0
Configuration files for IPv4 / IPv6:
* /etc/rc.config.d/netconf
* /etc/rc.config.d/netconf-ipv6
=== Disks ===
Show physical disk info:
ioscan -funC disk
=== Software ===
Show software bundles:
swlist -i
=== Other ===

Latest revision as of 17:44, 26 June 2024

Hardware

  • Vizualize C3000 (9000/785/C3000)
  • 400 MHz PA-RISC PA-8500
  • 512 MB (4 of 8 slots, max 8 GB)
  • fx6 4554B Graphics Card (EVC aka P&D-A Output)
    • Initially driving: 1280x1024@75Hz, compatible with 1600x1200 @75 Hz
  • Firmware 5.0, ISL A.00.43
  • Liteon CDROM LTN485S -> Samsung CDRW/DVD SM-352B
  • Space for 2 SCSI-3 (Ultra 160) Disks
  • Disk:
    • Original: Seagate ST3920LC (9.1 GB, 10 k RPM, U160) / Fujitsu MAN3184MC (18 GB, 10 k RPM, U160)
    • Upgraded: Fujitsu MAW3300NC (300 GB, 10 k RPM, U320)
  • Supports HP-UX 11.11 (11i v1)

Note: with no keyboard, boots with first serial interface as console (9600-8N1)

Software

See also here.

Boot

Processor Dependent Code

Interrupt PDC boot process by keyboard in 10s, to enter boot menu:

To show current options and help, and get to main menu:

display
help
main

Show boot path:

path

Boot from primary or alternative paths:

boot PRI
boot ALT

Search for boot devices:

search

Search for IPL devices:

search ipl

Boot from one of the paths above with Path Number:

boot P1

Set primary boot path to SCSI ID 6:

path pri P2

Enter configuration menu:

configuration

Show/change monitor configuration:

monitor list

Show/change time configuration:

time

Enter information menu:

information

Enter service menu:

service

Initial System Loader

Once a boot command is sucessful, the ISL is read from disk, and can be interacted with if chosen. Run Offline Diagnostics Environment (ODE):

ode

Or the HP-UX Secondary System Loader which starts the HP-UX kernel (vmunix):

hpux

possibly with flags for single user, maintenance, or a custom kernel:

hpux –is
hpux –lm
hpux (;0)/stand/vmunix.prev

When booting off CD-ROM to install:

hpux (;0):INSTALL

See help for more.

Installation

  • HP-UX 11i Operating Environment March 2003 (2 CDs)

Support Plus

mkdir /cdrom
ioscan -fnC disk
mount -F cdfs -o ro -r /dev/dsk/c1t2d0 /cdrom

See documents:

* /cdrom/USRGUIDE.PDF
* /cdrom/TEXT_FILES

Administration

See also: here

Desktop

Enable/disable auto-start:

/usr/dt/bin/dtconfig -e
/usr/dt/bin/dtconfig -d

Control which X servers to start:

/etc/dt/config/Xservers

Errors:

/var/dt/Xerrors

Networking

Show network interfaces:

lanscan -i
ifconfig lan0

Configuration files for IPv4 / IPv6:

  • /etc/rc.config.d/netconf
  • /etc/rc.config.d/netconf-ipv6

Disks

Show physical disk info:

ioscan -funC disk

Software

Show software bundles:

swlist -i

Other