HP-UX: Difference between revisions
Jump to navigation
Jump to search
NickPGSmith (talk | contribs) |
NickPGSmith (talk | contribs) |
||
| (29 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
== Hardware == | == Hardware == | ||
* Vizualize C3000 (9000/785/C3000) | * Vizualize [https://www.openpa.net/systems/hp-visualize_b1000_c3000_c3600.html C3000] (9000/785/C3000) | ||
* 400 MHz PA-RISC | * 400 MHz PA-RISC PA-8500 | ||
* 512 MB (4 of 8 slots, max 8 GB) | * 512 MB (4 of 8 slots, max 8 GB) | ||
* fx6 4554B Graphics Card ([https://en.wikipedia.org/wiki/ | * fx6 4554B Graphics Card ([https://en.wikipedia.org/wiki/VESA_Enhanced_Video_Connector EVC] aka P&D-A Output) | ||
** Initially driving: 1280x1024@75Hz, compatible with 1600x1200 @75 Hz | |||
* Firmware 5.0, ISL A.00.43 | * Firmware 5.0, ISL A.00.43 | ||
* Liteon CDROM LTN485S -> Samsung CDRW/DVD SM-352B | |||
* Space for 2 SCSI-3 (Ultra 160) Disks | |||
* Disk: | |||
** Original: Seagate ST3920LC (9.1 GB, 10 k RPM, U160) / Fujitsu MAN3184MC (18 GB, 10 k RPM, U160) | |||
** Upgraded: Fujitsu MAW3300NC (300 GB, 10 k RPM, U320) | |||
* Supports HP-UX 11.11 (11i v1) | * Supports HP-UX 11.11 (11i v1) | ||
| Line 17: | Line 23: | ||
* [https://archive.org/details/hp-ux-11i-version-1-mission-critical-operating-environment-sept-2005 Misson Critical Environment (Sept 2005)] | * [https://archive.org/details/hp-ux-11i-version-1-mission-critical-operating-environment-sept-2005 Misson Critical Environment (Sept 2005)] | ||
* [https://archive.org/details/hp-ux-11i-version-1-application-software-june-2006 Application Software (June 2006)] | * [https://archive.org/details/hp-ux-11i-version-1-application-software-june-2006 Application Software (June 2006)] | ||
* [https://archive.org/details/hpux-11i-v2 HP-UX 11iv2] | |||
* [https://archive.org/details/ftp-hpux-connect-org-uk HP Connect] | * [https://archive.org/details/ftp-hpux-connect-org-uk HP Connect] | ||
== Boot == | |||
=== Processor Dependent Code === | |||
Interrupt PDC boot process by keyboard in 10s, to enter boot menu: | |||
To show current options and help, and get to main menu: | |||
display | |||
help | |||
main | |||
Show boot path: | |||
path | |||
Boot from primary or alternative paths: | |||
boot PRI | |||
boot ALT | |||
Search for boot devices: | |||
search | |||
Search for IPL devices: | |||
search ipl | |||
Boot from one of the paths above with Path Number: | |||
boot P1 | |||
Set primary boot path to SCSI ID 6: | |||
path pri P2 | |||
Enter configuration menu: | |||
configuration | |||
Show/change monitor configuration: | |||
monitor list | |||
Show/change time configuration: | |||
time | |||
Enter information menu: | |||
information | |||
Enter service menu: | |||
service | |||
=== Initial System Loader === | |||
Once a boot command is sucessful, the ISL is read from disk, and can be interacted with if chosen. Run Offline Diagnostics Environment (ODE): | |||
ode | |||
Or the HP-UX Secondary System Loader which starts the HP-UX kernel (vmunix): | |||
hpux | |||
possibly with flags for single user, maintenance, or a custom kernel: | |||
hpux –is | |||
hpux –lm | |||
hpux (;0)/stand/vmunix.prev | |||
When booting off CD-ROM to install: | |||
hpux (;0):INSTALL | |||
See help for more. | |||
== Installation == | |||
* HP-UX 11i Operating Environment March 2003 (2 CDs) | |||
== Support Plus == | |||
mkdir /cdrom | |||
ioscan -fnC disk | |||
mount -F cdfs -o ro -r /dev/dsk/c1t2d0 /cdrom | |||
See documents: | |||
* /cdrom/USRGUIDE.PDF | |||
* /cdrom/TEXT_FILES | |||
== Administration == | |||
See also: [https://www.justsomestuff.co.uk/wiki/doku.php/hpux here] | |||
=== Desktop === | |||
Enable/disable auto-start: | |||
/usr/dt/bin/dtconfig -e | |||
/usr/dt/bin/dtconfig -d | |||
Control which X servers to start: | |||
/etc/dt/config/Xservers | |||
Errors: | |||
/var/dt/Xerrors | |||
=== Networking === | |||
Show network interfaces: | |||
lanscan -i | |||
ifconfig lan0 | |||
Configuration files for IPv4 / IPv6: | |||
* /etc/rc.config.d/netconf | |||
* /etc/rc.config.d/netconf-ipv6 | |||
=== Disks === | |||
Show physical disk info: | |||
ioscan -funC disk | |||
=== Software === | |||
Show software bundles: | |||
swlist -i | |||
=== Other === | |||
Latest revision as of 17:44, 26 June 2024
Hardware
- Vizualize C3000 (9000/785/C3000)
- 400 MHz PA-RISC PA-8500
- 512 MB (4 of 8 slots, max 8 GB)
- fx6 4554B Graphics Card (EVC aka P&D-A Output)
- Initially driving: 1280x1024@75Hz, compatible with 1600x1200 @75 Hz
- Firmware 5.0, ISL A.00.43
- Liteon CDROM LTN485S -> Samsung CDRW/DVD SM-352B
- Space for 2 SCSI-3 (Ultra 160) Disks
- Disk:
- Original: Seagate ST3920LC (9.1 GB, 10 k RPM, U160) / Fujitsu MAN3184MC (18 GB, 10 k RPM, U160)
- Upgraded: Fujitsu MAW3300NC (300 GB, 10 k RPM, U320)
- Supports HP-UX 11.11 (11i v1)
Note: with no keyboard, boots with first serial interface as console (9600-8N1)
Software
See also here.
- HP-UX Installation (March 2001) with patches
- Misson Critical Environment (Sept 2005)
- Application Software (June 2006)
- HP-UX 11iv2
- HP Connect
Boot
Processor Dependent Code
Interrupt PDC boot process by keyboard in 10s, to enter boot menu:
To show current options and help, and get to main menu:
display help main
Show boot path:
path
Boot from primary or alternative paths:
boot PRI boot ALT
Search for boot devices:
search
Search for IPL devices:
search ipl
Boot from one of the paths above with Path Number:
boot P1
Set primary boot path to SCSI ID 6:
path pri P2
Enter configuration menu:
configuration
Show/change monitor configuration:
monitor list
Show/change time configuration:
time
Enter information menu:
information
Enter service menu:
service
Initial System Loader
Once a boot command is sucessful, the ISL is read from disk, and can be interacted with if chosen. Run Offline Diagnostics Environment (ODE):
ode
Or the HP-UX Secondary System Loader which starts the HP-UX kernel (vmunix):
hpux
possibly with flags for single user, maintenance, or a custom kernel:
hpux –is hpux –lm hpux (;0)/stand/vmunix.prev
When booting off CD-ROM to install:
hpux (;0):INSTALL
See help for more.
Installation
- HP-UX 11i Operating Environment March 2003 (2 CDs)
Support Plus
mkdir /cdrom ioscan -fnC disk mount -F cdfs -o ro -r /dev/dsk/c1t2d0 /cdrom
See documents:
* /cdrom/USRGUIDE.PDF * /cdrom/TEXT_FILES
Administration
See also: here
Desktop
Enable/disable auto-start:
/usr/dt/bin/dtconfig -e /usr/dt/bin/dtconfig -d
Control which X servers to start:
/etc/dt/config/Xservers
Errors:
/var/dt/Xerrors
Networking
Show network interfaces:
lanscan -i ifconfig lan0
Configuration files for IPv4 / IPv6:
- /etc/rc.config.d/netconf
- /etc/rc.config.d/netconf-ipv6
Disks
Show physical disk info:
ioscan -funC disk
Software
Show software bundles:
swlist -i