Jump to content

HP-UX: Difference between revisions

From Smithnet Wiki
← Older edit
 
(13 intermediate revisions by the same user not shown)
Line 4: Line 4:
* 400 MHz PA-RISC PA-8500
* 400 MHz PA-RISC PA-8500
* 512 MB (4 of 8 slots, max 8 GB)
* 512 MB (4 of 8 slots, max 8 GB)
* fx6 4554B Graphics Card ([https://en.wikipedia.org/wiki/VESA_Enhanced_Video_Connector EVC] aka P&D-A Output)
* HP Visualize FX6 (A4554B) Graphics Card ([https://en.wikipedia.org/wiki/VESA_Enhanced_Video_Connector EVC] aka P&D-A Output) (with A4560A texture accelerator)
** Initially driving: 1280x1024@75Hz, compatible with 1600x1200 @75 Hz
** Initially driving: 1280x1024@75Hz, compatible with 1600x1200 @75 Hz
* Firmware 5.0, ISL A.00.43
* Firmware 5.0, ISL A.00.43
Line 11: Line 11:
* Disk:
* Disk:
** Original: Seagate ST3920LC (9.1 GB, 10 k RPM, U160) / Fujitsu MAN3184MC (18 GB, 10 k RPM, U160)
** Original: Seagate ST3920LC (9.1 GB, 10 k RPM, U160) / Fujitsu MAN3184MC (18 GB, 10 k RPM, U160)
** Upgraded: Fujitsu MAW3300NC (300 GB, 10 k RPM, U320)
** Upgraded: Fujitsu (73 GB, 10 k RPM, U320)
* Supports HP-UX
* Supports HP-UX
** 11i v1 (11.11) officially
** 10.20 32-bit from version ACE9912
** 11.00 64-bit from version ACE9911
** 11i v1 (11.11)
*** Technical Computing [https://web.archive.org/web/20050219161856/http://docs.hp.com/en/B3920-90091/ch04s01.html Operating Environment] (TCOE) for workstations
*** Technical Computing [https://web.archive.org/web/20050219161856/http://docs.hp.com/en/B3920-90091/ch04s01.html Operating Environment] (TCOE) for workstations
*** Minimal Technical Operating Environment (MTOE) for workstations
*** Minimal Technical Operating Environment (MTOE) for workstations
** 11i v2 (11.23) except graphics
** 11i v2 (11.23) unofficially; except graphics


Note: with no keyboard, boots with first serial interface as console (9600-8N1)
Note: with no keyboard, boots with first serial interface as console (9600-8N1)
Line 22: Line 24:
== Software ==
== Software ==


See also [https://nixdoc.net/man-pages/HP-UX/ here].
OS Installation images:
* [https://archive.org/details/hp-ux11i11.0 HP-UX 11i (11.0)]
* [https://archive.org/details/hp-ux-11i-version-1-mission-critical-operating-environment-sept-2005 HP-UX 11i v1 (11.11) Misson Critical Environment (Sept 2005)]
* [https://archive.org/details/hp-ux-11i-version-1-application-software-june-2006 HP-UX 11i v1 Application Software (June 2006)]
* [https://archive.org/details/hpux-11i-v2 HP-UX 11i v2 (11.23)]


* [https://archive.org/details/hp-ux11i11.0 HP-UX Installation (March 2001)] with patches
Other software archive:
* [https://archive.org/details/hp-ux-11i-version-1-mission-critical-operating-environment-sept-2005 Misson Critical Environment (Sept 2005)]
* [https://archive.org/details/hp-ux-11i-version-1-application-software-june-2006 Application Software (June 2006)]
* [https://archive.org/details/hpux-11i-v2 HP-UX 11iv2]
* [https://archive.org/details/ftp-hpux-connect-org-uk HP Connect]
* [https://archive.org/details/ftp-hpux-connect-org-uk HP Connect]


Line 95: Line 98:
== Installation ==
== Installation ==


* HP-UX 11i Operating Environment March 2003 (2 CDs)
TBC


== Support Plus ==
== Support Plus ==
Line 109: Line 112:
== Administration ==
== Administration ==


See also: [https://www.justsomestuff.co.uk/wiki/doku.php/hpux here]
See also:
* [https://www.justsomestuff.co.uk/wiki/doku.php/hpux/hpux_index some docs]
* [https://nixdoc.net/man-pages/HP-UX/ nixdoc].
 
=== Hardware ===
 
If new devices are not detected:
cd /dev
insf -e
 
Show all devices:
ioscan -f
 
Scan for disks:
/usr/sbin/ioscan -d sdisk
 
Scan for a floppy drive:
ioscan -fnC floppy
 
which should produce a device file like "/dev/floppy/c0t1d0".
 
Format a floppy:
mediainit -f 16 /dev/floppy/c0t1d0
 
where 16 is the format type listed in the floppy command's man page.
 
Read/write data to device file with tar, or access DOS formatted files with:
* dosls
* doscp


=== Desktop ===
=== Desktop ===

Latest revision as of 17:51, 15 February 2025

Hardware

  • Vizualize C3000 (9000/785/C3000)
  • 400 MHz PA-RISC PA-8500
  • 512 MB (4 of 8 slots, max 8 GB)
  • HP Visualize FX6 (A4554B) Graphics Card (EVC aka P&D-A Output) (with A4560A texture accelerator)
    • Initially driving: 1280x1024@75Hz, compatible with 1600x1200 @75 Hz
  • Firmware 5.0, ISL A.00.43
  • Liteon CDROM LTN485S -> Samsung CDRW/DVD SM-352B
  • Space for 2 SCSI-3 (Ultra 160) Disks
  • Disk:
    • Original: Seagate ST3920LC (9.1 GB, 10 k RPM, U160) / Fujitsu MAN3184MC (18 GB, 10 k RPM, U160)
    • Upgraded: Fujitsu (73 GB, 10 k RPM, U320)
  • Supports HP-UX
    • 10.20 32-bit from version ACE9912
    • 11.00 64-bit from version ACE9911
    • 11i v1 (11.11)
      • Technical Computing Operating Environment (TCOE) for workstations
      • Minimal Technical Operating Environment (MTOE) for workstations
    • 11i v2 (11.23) unofficially; except graphics

Note: with no keyboard, boots with first serial interface as console (9600-8N1)

Software

OS Installation images:

Other software archive:

Boot

Processor Dependent Code

Interrupt PDC boot process by keyboard in 10s, to enter boot menu:

To show current options and help, and get to main menu: 

display
help
main

Show boot path: 

path

Boot from primary or alternative paths: 

boot PRI
boot ALT

Search for boot devices: 

search

Search for IPL devices: 

search ipl

Boot from one of the paths above with Path Number: 

boot P1

Set primary boot path to SCSI ID 6: 

path pri P2

Enter configuration menu: 

configuration

Show/change monitor configuration: 

monitor list

Show/change time configuration: 

time

Enter information menu: 

information

Enter service menu: 

service

Initial System Loader

Once a boot command is sucessful, the ISL is read from disk, and can be interacted with if chosen. Run Offline Diagnostics Environment (ODE): 

ode

Or the HP-UX Secondary System Loader which starts the HP-UX kernel (vmunix): 

hpux

possibly with flags for single user, maintenance, or a custom kernel: 

hpux –is
hpux –lm
hpux (;0)/stand/vmunix.prev

When booting off CD-ROM to install: 

hpux (;0):INSTALL

See help for more.

Installation

TBC

Support Plus

mkdir /cdrom
ioscan -fnC disk
mount -F cdfs -o ro -r /dev/dsk/c1t2d0 /cdrom

See documents: 

* /cdrom/USRGUIDE.PDF
* /cdrom/TEXT_FILES

Administration

See also:

Hardware

If new devices are not detected: 

cd /dev
insf -e

Show all devices: 

ioscan -f

Scan for disks: 

/usr/sbin/ioscan -d sdisk

Scan for a floppy drive: 

ioscan -fnC floppy

which should produce a device file like "/dev/floppy/c0t1d0".

Format a floppy: 

mediainit -f 16 /dev/floppy/c0t1d0

where 16 is the format type listed in the floppy command's man page.

Read/write data to device file with tar, or access DOS formatted files with:

  • dosls
  • doscp

Desktop

Enable/disable auto-start: 

/usr/dt/bin/dtconfig -e
/usr/dt/bin/dtconfig -d

Control which X servers to start: 

/etc/dt/config/Xservers

Errors: 

/var/dt/Xerrors

Networking

Show network interfaces: 

lanscan -i
ifconfig lan0

Configuration files for IPv4 / IPv6:

  • /etc/rc.config.d/netconf
  • /etc/rc.config.d/netconf-ipv6

Disks

Show physical disk info: 

ioscan -funC disk

Software

Show software bundles: 

swlist -i

Other

Retrieved from "https://www.smithnet.org.uk/wiki/index.php?title=HP-UX&oldid=1263"