Rasberry Pi: Difference between revisions
Jump to navigation
Jump to search
NickPGSmith (talk | contribs) |
NickPGSmith (talk | contribs) m (14 revisions imported) |
||
| (9 intermediate revisions by the same user not shown) | |||
| Line 10: | Line 10: | ||
== Rasberry Pi OS == | == Rasberry Pi OS == | ||
See | See [https://www.raspberrypi.com/documentation/computers/config_txt.html /boot/firmware/config.txt]. | ||
Command line configuration program: | |||
raspi-config | |||
=== Upgrades === | |||
apt update && sudo apt upgrade -y | |||
=== Web Server === | |||
apt install apache2 | |||
* Configuration: /etc/apache2 | |||
* Serve from: /var/www/html | |||
=== Change swap === | === Change swap === | ||
dphys-swapfile swapoff | dphys-swapfile swapoff | ||
Edit /etc/dphys-swapfile, eg | Edit /etc/dphys-swapfile, eg 1 GB: | ||
CONF_SWAPSIZE=1024 | CONF_SWAPSIZE=1024 | ||
| Line 23: | Line 37: | ||
=== Composite Video === | === Composite Video === | ||
Note: CVBS is on sleve; Gnd is ring 3. | Note: CVBS is on sleve; Gnd is ring 3. It is enabled when no HDMI monitor is connected. | ||
In config.txt, set | In config.txt, set for PAL (UK): | ||
* sdtv_mode=2 | * sdtv_mode=2 | ||
=== Temperature === | |||
Divide value by 1000 to get temp in C: | |||
* /sys/class/thermal/thermal_zone0/temp | |||
CPU Core throttling above 80 C. | |||
Latest revision as of 04:53, 8 May 2024
Device
Windows IOT
Rasberry Pi OS
See /boot/firmware/config.txt.
Command line configuration program:
raspi-config
Upgrades
apt update && sudo apt upgrade -y
Web Server
apt install apache2
- Configuration: /etc/apache2
- Serve from: /var/www/html
Change swap
dphys-swapfile swapoff
Edit /etc/dphys-swapfile, eg 1 GB:
CONF_SWAPSIZE=1024
dphys-swapfile setup dphys-swapfile swapon
Composite Video
Note: CVBS is on sleve; Gnd is ring 3. It is enabled when no HDMI monitor is connected.
In config.txt, set for PAL (UK):
- sdtv_mode=2
Temperature
Divide value by 1000 to get temp in C:
- /sys/class/thermal/thermal_zone0/temp
CPU Core throttling above 80 C.