HP-UX: Difference between revisions
NickPGSmith (talk | contribs) |
NickPGSmith (talk | contribs) |
||
| Line 119: | Line 119: | ||
Show physical disk info: | Show physical disk info: | ||
ioscan -funC disk | ioscan -funC disk | ||
=== Software === | |||
Show software bundles: | |||
swlist -i | |||
=== Other === | === Other === | ||
Revision as of 17:25, 20 July 2023
Hardware
- Vizualize C3000 (9000/785/C3000)
- 400 MHz PA-RISC PA-8500
- 512 MB (4 of 8 slots, max 8 GB)
- fx6 4554B Graphics Card (EVC aka P&D-A Output)
- Compatible Monitors: 19/21" 1280x1024 / 1600x1200 @75 Hz
- Firmware 5.0, ISL A.00.43
- Liteon CDROM LTN485S -> Samsung CDRW/DVD SM-352B
- Space for 2 SCSI-3 (Ultra 160) Disks
- Original Disk: 9.1 GB 10kRPM Seagate ST3920LC
- Supports HP-UX 11.11 (11i v1)
Note: with no keyboard, boots with first serial interface as console (9600-8N1)
Software
See also here.
- HP-UX Installation (March 2001) with patches
- Misson Critical Environment (Sept 2005)
- Application Software (June 2006)
- HP-UX 11iv2
- HP Connect
Boot
Processor Dependent Code
Interrupt PDC boot process by keyboard in 10s, to enter boot menu:
To show current options and help, and get to main menu:
display help main
Show boot path:
path
Boot from primary or alternative paths:
boot PRI boot ALT
Search for boot devices:
search
Search for IPL devices:
search ipl
Boot from one of the paths above with Path Number:
boot P1
Set primary boot path to SCSI ID 6:
path pri P2
Enter configuration menu:
configuration
Show/change monitor configuration:
monitor list
Show/change time configuration:
time
Enter information menu:
information
Enter service menu:
service
Initial System Loader
Once a boot command is sucessful, the ISL is read from disk, and can be interacted with if chosen. Run Offline Diagnostics Environment (ODE):
ode
Or the HP-UX Secondary System Loader which starts the HP-UX kernel (vmunix):
hpux
possibly with flags for single user, maintenance, or a custom kernel:
hpux –is hpux –lm hpux (;0)/stand/vmunix.prev
When booting off CD-ROM to install:
hpux (;0):INSTALL
See help for more.
Installation
- HP-UX 11i Operating Environment March 2003 (2 CDs)
Support Plus
mkdir /cdrom ioscan -fnC disk mount -F cdfs -o ro -r /dev/dsk/c1t2d0 /cdrom
See documents:
* /cdrom/USRGUIDE.PDF * /cdrom/TEXT_FILES
Administration
See also: here
Networking
Show network interfaces:
lanscan -i ifconfig lan0
Configuration files for IPv4 / IPv6:
- /etc/rc.config.d/netconf
- /etc/rc.config.d/netconf-ipv6
Disks
Show physical disk info:
ioscan -funC disk
Software
Show software bundles:
swlist -i