HP-UX
Hardware
- Vizualize C3000 (9000/785/C3000)
- 400 MHz PA-RISC PA-8500
- 512 MB (4 of 8 slots, max 8 GB)
- fx6 4554B Graphics Card (EVC Output)
- Firmware 5.0, ISL A.00.43
- Liteon CDROM LTN485S -> Samsung CDRW/DVD SM-352B
- Space for 2 SCSI-3 (Ultra 160) Disks
- Original Disk: 9.1 GB 10kRPM Seagate ST3920LC
- Supports HP-UX 11.11 (11i v1)
Note: with no keyboard, boots with first serial interface as console (9600-8N1)
Software
See also here.
- HP-UX Installation (March 2001) with patches
- Misson Critical Environment (Sept 2005)
- Application Software (June 2006)
- HP Connect
Boot
Interrupt boot process by keyboard in 10s, to enter boot menu.
To show current options and help:
display help
Show boot path:
path
Boot from primary or alternative paths:
boot PRI boot ALT
Then start the Initial Program Loader. Example commands:
help display lsautofl
Boot to single-user mode, or maintenance mode:
IPL> hpux -is IPL> hpux -lm
Search for boot devices:
IPL> search
Boot from IDE (eg CD-ROM):
IPL> boot IDE
Set primary boot path to SCSI ID 6:
primpath 10/0/15/1.6.0.0.0.0.0
Enter configuration menu:
configuration
Show/change monitor configuration:
monitor list
Show/change time configuration:
time
Installation
- HP-UX 11i Operating Environment March 2003 (2 CDs)
Support Plus
mkdir /cdrom ioscan -fnC disk mount -F cdfs -o ro -r /dev/dsk/c1t2d0 /cdrom
See documents:
* /cdrom/USRGUIDE.PDF * /cdrom/TEXT_FILES
Administration
- /etc/rc.config.d/netconf